Oil Can Suppressor w/ Barrel Cover and attachments

**WARNING**: THIS IS VERY SHARP AT THE FRONT OF THE BARREL. KEEP ALL SENSITIVE BODY PARTS AWAY FROM IT. **NOTE** THIS IS FOR THE 12 BCAR VARIANT OF THE ZNC AUS. YOU WILL ALSO HAVE TO PAINT IT.(unless you have ams and set a color change) **NOTE 2** It slides over the 12 bcar barrel. I wanted to add an attachment for the 12 BCAR of the ZNC AUS, making it look cooler (in my opinion), and I landed on an oil can silencer. When I printed it, it was a little loose around the BCAR, so I just used a few pieces of paper to make it a tighter fit. I also made a model to cover the bare metal barrel shown on the 12 BCAR variant. I might make a variant in the future that adds a way to tighten/loosen the suppressor, but for now, I am satisfied. I also made a sight for it, same with a camera mount, they are both for the RMR plate on top of the blaster. Camera mount uses 2 M3 screws to mount it in place with 1 M3x20 screw with 1 or more M3 Nut securing the camera box to the mount. Link to camera mount, it has more context here(also included a file): https://www.printables.com/model/1313185-rmr-camera-mount The sight is a file. I printed the oil can at 5% grid infill do more if you wish, supports if needed(i used organic).