OK Trophy with eyes

I got asked by @Keen_Edge_1017448 to make a remix so here it goes. @Keen_Edge_1017448 I am doing this for you! Use original hat and nameplate. I removed all gaps from the base. Those gaps bothered me immensely. Now both legs and nameplate should be a tight fit now and require no glue. If you are not okay with that - use the original base. The insert part definitely requires a brim. In case of body_main use brim at your own discretion. Use snug supports for eye and mouth holes. Use your x-acto knife for cleanup if needed. I printed everything at 62.5% scale with 0.25 nozzle and experienced no problems during the assembly. I assume printing at 100% with 0.4 nozzle should be just as smooth.