Open-Air Desktop Speaker Kit for 8cm Units V2 (Square Edition)

This is Version 2 of the Open-Air Desktop Speaker, featuring a simple and clean Square-framed design . (Check out the original Version 1 here!) ⚠️ IMPORTANT NOTE: This project uses a unique technique where the grille's honeycomb mesh is generated using Bambu Studio's Infill settings . Therefore, it will not print correctly with other slicers . Please use the provided .3mf file and Bambu Studio for the best results. Quick Compatibility Test If you are unsure if your speaker unit will fit, print only the brackets from Plate 4 first. Place your unit on the printed brackets to check if the M4 screw holes align properly. This allows you to verify compatibility before printing the rest of the parts. Compatible Units Tested with: FOSTEX FE83NV2 (Current model) FOSTEX FE87 (Legacy model) Note: It should be compatible with most standard 8cm units as long as the mounting hole patterns align. Feedback: If you successfully mount a different model, please let us know in the comments to help build a compatibility list! Bill of Materials (BOM) Screws: 4x M4 x 16mm (Main assembly), 2x M4 x 8mm (Stand pivot). Nuts: 6x Standard M4 nuts. Print Settings Support: REQUIRED for Plate 1 (Main Frame) only. Other parts do not require support. Note: The .3mf file is pre-configured with the correct infill and support settings. Specifically, Plate 2 is configured with layer-based color settings (Red/Black/Tan) for the logo. Plate List (All-in-One .3mf) Plate 1 (Main Frame): The core speaker housing. (Support required) Plate 2 (Heart Radio Grille): Special version with 3-color layers (Red/Black/Tan). Plate 3 (Plain Grille): Clean grille without the logo. Plate 4 (Stand): Desktop Stand and pivot brackets. (Identical to Version 1) Note for Version 1 Users: The Stand parts in Plate 4 are identical to the original V1. If you already have the V1 stand, you only need to print Plate 1 and your choice of grille (Plate 2 or 3) to enjoy the new Square Edition!