OpenGrid Filler Spool Guide (90 Degrees)

This is a Filler Spool Guide which has been optimized for the OpenGrid system . It still requires a roller and the bearings (either 608 or the plastic bearings) but otherwise clips into the OpenGrid Full grid system (not compatible with Lite). The clips on the end use KYZ Design's openGrid KV Fitting Remix Base , model KV2 (directional snaps). I didn't use the ring clips to hold it more securely, but you can if you choose. I have cut the guide down to use smaller (41mm, 250g) spools as well as the larger 1kg spools. Neither seems to walk off the roller. Printed using the same as the recommended print settings: Printer: Ender3 v2 Rafts: No Supports: Yes (manual under the guide; not necessary anywhere else) Resolution: 0.2mm Infill: 20% +, Tri-Hexagon Wall Thickness: 3 Perimeters Buildplate: Skirt