OpenPrintTag SpoolAdapter

Updates Have a look at the new slim version! Description This is a set of snap-in spool adapters designed for the OpenPrintTag . Some filament brands have oversized inner spool diameters, which makes the OpenPrintTag unable to stick in place. These adapters solve that issue by reducing the inner diameter and providing a secure mounting point. Also, you can use this adapter to reuse the OpenPrintTag without having to worry about the adhesive not sticking anymore. Why use this? Fits many spools that are normally incompatible with OpenPrintTag Snap-fit engagement - clicks into place and holds firmly Reusable - just pull it out and transfer it to the next spool Spools Some brands change spooltype or use the same spooltype as other brands. Use this table to find the right file for your spool. Tip: For paper spools, twist the SpoolAdapter while inserting. Brand/Type Spool 3DJake AmazonBasic (no image available) add:north untested Elegoo (no image available) Eryone 📷 Image redacted — claim this model to add your own media Geetech 📷 Image redacted — claim this model to add your own media 📷 Image redacted — claim this model to add your own media Overture 📷 Image redacted — claim this model to add your own media Panchroma by Polymaker 📷 Image redacted — claim this model to add your own media Polymaker 📷 Image redacted — claim this model to add your own media Prusament (cardboard-core) 1kg & 2kg 📷 Image redacted — claim this model to add your own media Recycling Fabrik MultiSpool 📷 Image redacted — claim this model to add your own media Sunlu (old) 📷 Image redacted — claim this model to add your own media Sunlu (1st Gen) Jayo 📷 Image redacted — claim this model to add your own media Sunlu (2nd Gen) 📷 Image redacted — claim this model to add your own media Sunlu (3rd Gen) 📷 Image redacted — claim this model to add your own media Tinmorry A 📷 Image redacted — claim this model to add your own media Tinmorry B 📷 Image redacted — claim this model to add your own media Tinmorry C 📷 Image redacted — claim this model to add your own media Printing recommendations Property Value Material PLA Nozzle 0.4 mm Layer height 0.2 mm Perimeters 2 recommended Infill 10 % gyroid Supports Not required Brim Not required No post-processing is required. Simply click the adapter into the spool and stick the OpenPrintTag into place. Note: the measurements in the file description are rounded, tolerances of +/-1mm are expected. Feedback If you want adapters for more spool brands, leave a comment with the exact inner diameter, thickness, brand and a photo. I'm happy to add more!