Original Prusa i3 MK3S+ Model Remix

Thanks Prusa for this awesome model! https://www.prusaprinters.org/prints/67178-original-prusa-i3-mk3s-gift-card I wanted to be able to print the parts in different colors and make it much larger. So I scaled it up a lot and cut the parts into separate pieces based on color. I used this https://www.prusaprinters.org/prints/107930-prusa-logo for the Prusa logo. I wanted it to be orange so it stands out. There are 2 options for the print head: "Black_Print_Head_With_Back.stl" is the easiest option. It has a back piece to hold it in place like the original. "Black_Print_Head_Without_Back.stl" is harder to assemble. It doesn't need the back piece, but you have to slide the rods through it before glueing the rods to the X Axis. All the parts are labeled according to the color they should be printed in. You need the following colors / materials: Black - PLA or PETG Orange - PLA or PETG Silver - PLA or PETG (I didn't have any silver so I used gray) Black - Flex (For cables) The following parts need glue: Black_Controller_Knob.stl Black_Controller_Lense.stl Black_Motor.stl Flex_Print_Head_Cable.stl Flex_X_Cable.stl Flex_Y_Cable.stl Orange_Controller.stl Orange_Logo.stl Orange_Motor_Mounts.stl Orange_X_Axis.stl Orange_Z_Rod_Holders.stl Silver_X_Rods.stl Silver_Y_Rods.stl Silver_Z_Rods.stl The rest are snap-together like the original. The X_Rods need a brim and the X_Axis needs supports. Happy printing!