P1P Side Mount Spool Holder & PTFE Guide For Complete Clean Look

After making the Complete Clean Look (a remix of the Lite Enclosure ) I wanted a clean and low profile side spool holder and PTFE guide. I found the excellent model from Nirin and adapted it to fit the new side pieces of the P1P. The spool holder was also made a bit thicker to sit alongside the P1P to give it a bit more of a cleaner look. Printing is very simple with supports needed for the PTFE guide. The side spool holder was printed with 8 walls and 50% infill. Maybe a little overkill but at least it's nice and meaty! The Bambu spool holder can be attached the normal way or upside down with the Spool Roller Modification from suit . Please see the photos to see how the holder is attached. You will need to screw the Bambu holder in first, before attaching it to your P1P. BOM: Spool Holder Bolts M3 x 18 M3 x 10 x2 For attaching at the rear M3 x 12 x2 For the Bambu spool holder M3 Nuts x3 PTFE Guide M3 x 12 x3 When attaching at the side, you will need an M3 Tapping bit. This will fit a P1P without the Clean Look pieces but you will have gaps! Earn your Prusameters and post your makes!