Pan Tilt for “Articulating Pi Cam Mount for MK3”

Now you don't need to just manipulate the Pi camera for each print, but during the print from the other room using Easy Servo plug in with Octoprint. Now I can remotely pan the camera to check the status of the spool and survey across the print in progress. Flexible mounting options using the Articulating Raspberry Pi Camera Mount There is a lot of variance in the dimensions of SG90 servos and the servo horns they come with. Here are the ones I used on this project for reference: https://www.amazon.com/dp/B07MLR1498?ref_=ppx_hzod_title_dt_b_fed_asin_title_0_0 These have extra beefy servo horns. Interfaces with and uses parts and design elements of the Articulating Raspberry Pi Camera Mount for Prusa MK3 and MK2 project by Sneaks. I use with the Easy Servo plug in for Octoprint. I would recommend limiting the range of motion in the plugin’s setting to avoid collisions while operating. BOM Printed parts: PartQtyNotes:Pan tilt mount - raspiCamBack servo mod v21Supports needed. Print top down or on back.Pan tilt mount - servo connect bracket1No supports. Print small closed face down.Pan tilt mount - mm 90 link servo mod v21No supports. Print on flat edge. Also you will need a raspicamcover that fits for your camera type and whatever brackets, links, and fasteners you need from the original project. Non-printed Parts: PartQtyNotesSG90 Servos2 M2 x 8mm SHCS w M2 Nuts4 Servo hardware Horns and screws that come with the servos.