Parametric Hockey Knob Cap

This is a fully parametric model for capping the end of a hockey stick with a knob. Parameters that can be changed include: shaft dimensions, knob thickness, cap thickness, corner roundedness, and whether to have a vent hole to equalize air pressure during installation. Use with hockey stick grip tape or wrap (i.e. Lizard Skins). Slicing instructions 0.2mm 4 walls, 4 top layers, 4 bottom layers 50%+ infill (gyroid recommended) No supports needed TPU filament recommended The included STL files are for a knob that is 3mm thick and 12.7mm tall with a 2.6mm cap thickness. I used my kid's Bauer VAPOR HYPERLITE 2 Youth stick as a reference. The measured shaft dimensions are 26.7mm x 18.4mm. Please see the customization instructions below for your own hockey stick. OpenSCAD customization instructions Download latest version of OpenSCAD at https://www.openscad.org/downloads.html Download and open the .scad file in OpenSCAD Change the parameters as desired in the Customizer pane If the Customizer window is not open, go to the OpenSCAD "Window" menu and select Customizer. Press "F5" to get a quick preview Press "F6" to render the geometry if the preview looks good Press "F7" to save the geometry to an .STL file Slice and print the .STL file