Pastamatic Leadscrew for 70mm, 100mm & 115mm Spools
by Robert Graf · via Printables
| Format | STL |
| Category | Mechanical |
| License | CC BY-NC-SA |
| Triangles | 18.6k |
| Uploaded | Jan 20, 2026 |
⬇ 47 downloads
❤ 4 likes
👁 219 views
Description
My spools (3DJake) are approx. 70mm wide, so I changed the design from 60mm (with 2 turns) to 2.5 turns. The SHORT version is 160mm long instead of 200mm. The 100mm and 115mm version have the middle of the groove (aka the inner flank of the spool) at 27mm distance from the cog. Please check your setup fits those measurements. Printed in PETG with 0.2mm layer height.
Originally published on Printables
