PCjr 16v Power Connector

This is the proprietary 3-pin 16V power connector for the PCjr. With this and a universal 16V tranformer you can reproduce the external power brick of the PCjr. Printed in TPU. For the contacts inside the connector, carefully de-pin a 4-pin Molex peripheral connector and re-use the female connectors. Solder wires to them and insert them into this print. I used epoxy along the top to hold the wires in place. The heat shrink is for aesthetics. 3.I used a transformer like this one from Amazon: https://www.amazon.com/Doorbell-Transformer-Adapter-Compatible-Listed/dp/B09Z6V1G1R?th=1