Pen Plotter for Sprite Extruder ~ Ender 3 S1

Also see our Latest Project Launching on Kickstarter 30th April 2023 https://www.kickstarter.com/projects/fizzychickens/3d-printable-antikythera-mechanism Remix of Three Ducks in a Bear Suit Pen Plotter Requires 2 x M3 Bolts (To hold Pen in Place) I use the spare M4 bolt that comes with the Sprite Extruder. EASY CONFIG! Configuration: In Cura, you'll need to offset the extruder so your printer knows where your pen is. The easiest way to achieve this is by adding a new printer, and pasting the Start and End G-code in their place. 📷 Image redacted — claim this model to add your own media ; Ender 3 S1 Start G-code G92 E0 ; Reset Extruder G28 ; Home all axes G92 E0 ; Reset Extruder Ender 3 S1 End G-code G91 ; Relative positioning G1 Z10 ; Raise Z more G90 ; Absolute positioning G1 X0 Y{machine_depth} ; Present print M84 X Y E ; Disable all steppers but Z Select: Extruder 1 and, for the Ender 3 S1, I recommend a Nozzle Offset of: X 20 Y -60 📷 Image redacted — claim this model to add your own media “Must Have” Slicer Settings: Print Temp 0 Bed Temp 0 Line Width 0.7mm Layer Height 0.5mm Walls 1 (Outlines) / 2+ Detailed Infil 100% Retractions ON Z-Hop when Retracted ON Z-Hop Height 1.5mm Cooling OFF Build Plate Adhesion NONE Convert Jpeg into STL Files Here: https://anyconv.com/jpeg-to-stl-converter/ Side Notes: After converting the JPEG into an STL via website, import the STL into Cura, and scale your Z to 200% for one layer. It will scale it to 10,000% automatically. Print the Pen Holder Parts with a 0.12 line width, 0.2 will make the two Pen Plotter Parts stuck and you'll need to print more than needed. The conversion website handles Black and White images best. I recommend the easy-to-use software Paint.NET as a way to edit your images.