PFEIFER | Mini Power Whistle

PFEIFER | Mini Power Whistle Meet PFEIFER, a tiny but very very powerful pebble-shaped whistle. It takes only 10g to print and is available in 2 sizes, Regular and Mini, and a variety of tones: Regular in mid-tone 2.5KHz Regular in high-pitch 4KHz Regular in dual tone (2.5KHz + 3.5KHz) Mini in high-pitch 4KHz Mini in mid-tone 2.5KHz Our cute rescue dog responds surpisingly well to the 4KHz. Don't mind the print quality on the pictures. I live in Taiwan (but I'm French.. long story..) and raining season just kicked. It's so humid it's almost impossible to get my prints right. Anyway... Happy printing! V2 UPDATE: The keyhole on V1 versions was a bit too small, so was enlarged on V2. DIMENSIONS (Regular) | W 35 mm x D 15 mm x H 50 mm DIMENSIONS (Small) | W 30 mm x D 15 mm x H 36 mm PRINTING | 30min All STL files are already oriented properly. Infill: 20% Wall line count: 2 Resolution: 0.2~0.3mm/layer or less (the bases in the pictures were printed in 0.2mm/layer) Build adhesion type: Brim 4mm Supports: None