Philips Oneblade Wall Mount and Charging Station - Easy and Fast Print with 3 new options!

General: This stand fits 3 replacement blades, and 2 combs. The body pocket is based on my 3d scan of the oneblade, then offset .5mm so it fits perfectly. There is a hole at the bottom of the pocket for charging. Why I designed this: I designed this to help clean up my small bathroom counter and keep my blades safe from damage. Printing notes: Layer height: .15 or finer is ideal Recommended Material: PLA or better Supports: None Infill: 15% Gyroid or triangle Walls: 2-3 Other Modifiers: Print as oriented Material Quantity: ≈50grams I printed from PC on Qidi plus4 at .15 layer height with 15% gyroid infill. Cautions and updates: Don't overtighten the screws in a stud, or it will crack the mounting tabs. _____________________________________________________________________________________________________________ Don’t forget to follow me, post a make, leave a like, or tell me what you don’t like so I can make improvements. Thanks, and Happy Printing! 📷 Image redacted — claim this model to add your own media Also Check out: For a more comprehensive wall mount, check out my larger version: https://www.printables.com/model/1317123-easy-mount-easy-print-philips-oneblade-wall-mount/files The other version has better fitting pockets and more of them for a wider range of accessories. You might also like my new extension handle for the oneblade: https://www.printables.com/model/1317332-philips-oneblade-extension-handleback-shaverbeta