PIco 4 ultra M41 pulse rifle PS3 rifle conversion kit

I played several fps using UEVR, they were cool but something was always missing especially when using a rifle and not a pistol especially in “ALIENS Fire Team Elite”. After some time the mod i created did not just feel enough nor it give the impression of holding the iconic pulse rifle, also the pico controller holder was a little bit nose dived and could not allow perfect alignment with iron sights. You will need a way to connect it to the pc and be seen as an Xbox pad, i used one from Mayflash but also software solutions would work, i found this project for an hardware interface https://github.com/wiredopposite/OGX-Mini but i had not the time to test it yet The controller can be found on eBay for around 20 Euros or Dollars: look for PS3 heavy fire Afghanistan on eBay. Remember also to correct the offset of the controller in UEVR and streaming assistant if needed. The modification need you to disassemble the rifle and remove the ps3 move holder lid, suggest use hot glue gun to fix the parts As for the battery cover you should either print the magazine a little bit over sized and use hot glue to fix it or heat the cavity to soften it to make the battery cover a snug fit. Use a 25mm aluminum pipe to connect the pad to the stock adapter (cut the pipe to a comfortable length) also you will need to modify this line in the "config.txt" file of the profile you are using VR_MotionControlsInactivityTimer= (input the timeout value in seconds, i use “7200” to have 2 hours)