Planetarty Pinhole Camera, a 4x5 pinhole camera

Description The Planetary Pinhole is a simple, entry-level pinhole camera with only five (5) parts to print. The camera is made of two interlocking sections. Place your photographic medium into the back section. Then slide the front section into the back section to hold the medium in place. The front and back sections are held together magnetically. Designed for 4x5 inch sheet film or photographic paper, the Planetary Pinhole's 72mm focal length gives a wide-angle field of view. The exposures are controlled by a magnetic locking shutter on the front section of the camera. There is a tripod-mounting socket on the base. Print Settings Printer brand: Bambu Lab Printer: A1 mini Supports: No Resolution: 0.20 mm Infill: 50% for all parts except shutter 100% for shutter (Infill may be decreased if you are sure of filament opacity) Assembly Non-printed parts -- Rare-earth magnets, 18pc @ 4mm x 2mm (i used these magnets ) -- 1/4"-20 UNC hex nut, 1pc (for using camera with standard tripod mount) -- Super glue