Print Encloser for Neptune 4 plus

I remixed this model in fusion to fit my Neptune 4 plus, I used some sound deadening foam for the walls but plan to use a different material in the future. The adjusted sizes should be labeled in each model stl file. I do apologize for the change in orientation for some of the models, that happened after making adjustments to the sizes. I printed all the files lying flat except for the corners for the door. If you have your printer dialed in this model should be able to be printed with no supports. it appears I did not include total dimensions for the enclosure, I do apologize for the delay, but they are 28.75"/29.5"x24.5"x27" (L x W x H) 28.75 not including the door and 29.5 including the door. Those dimensions are in inches, I hope this helps. I have also included photos from the original model to help with assembling the model. One difference between my model and the original is that I have 2 dimensions for A1 and A2. A1 and A2 (215mm) are for the sides of the enclosure and A1 and A2 (200mm) are for the bottom back of the model.