Print In Place 200mm bearing

PETG !!! 0.2 nozzel !!! (mandatory for quality) ALSO MAKE CUSTOM SUPPORTS AS SHOWN IN THE PICTURE !! or else the print will come out seazed. Use a drill to spin the bearing UNLUBED in order to polish the balls through friction, not long though as it can end up melting the plastic. Also increase top z distance of the supports to make them easely removable and prevent them being stuck on the balls. Infill can be anywhere from 30 to 100% preferably gyroid for structural integrity, with 5 wall loops at least and 5 to 7 top buttom. The print temperature is preferably set on the lower side in order to increase dimensional accuracy.