Printable Cable Chain

I would like to present you version 2.0 of the design. I received some feedback from several users after they printed my previous design version, thank you for that! this has given me new insights for expansion and improvements of the design. All parts have been tested by me for printability, some tolerances have also been adjusted between the parts for a better fit. 📷 Image redacted — claim this model to add your own media What has changed in the design: Additional end pieces with two mounting holes have now been added to the design and the design of end (a) is adapted to the same shape as end (b). 📷 Image redacted — claim this model to add your own media Sharp corners are rounded for better print quality. 📷 Image redacted — claim this model to add your own media The coupling part is chamfered for easier attachment 📷 Image redacted — claim this model to add your own media 📷 Image redacted — claim this model to add your own media Dimensions 40 degree chain: 📷 Image redacted — claim this model to add your own media Dimensions 30 degree chain: 📷 Image redacted — claim this model to add your own media The dimensions of a chain are: Wide 17mm High 14.3mm 📷 Image redacted — claim this model to add your own media A design for printing the generic cable chain yourself. Can only turn in one direction. Material: PLA, ABS or ASA. (ASA recommended) . layer height recommended: 0.2mm. Extrusion width recommended: 0.4mm. Fill Type: Grid, Gyroid, Honeycomb, Triangle or Cubic. Infill percentage recommended: 40%. Wall count recommended: 4. Solid top/bottom layers recommended: 5. Printable without support! Now also available → Bed and Frame Cable Chain Mount Please follow more designs soon !!! 04-2023 update v2.0