Printbed Scraper - CIUNCARELLO Printbed Scraper (Upgraded magnet holder)

CIUNCARELLO boats a distinctive design and features that sets it apart from conventional bed scrapers, making it the ULTIMATE Accessory for your 3D Printing needs. Upgraded to fit almost any magnet lying around the house (16mm or smaller) The one used is an old shower curtain magnet. For smaller magnets use a dab of glue to hold it in and your good. Filled in second hole for the second magnet. Adding to its functionality it features an additional circular ring at the back which serves a multi-functional use, allowing users to comfortably hold and maneuver the scraper with precision and doubling as a finger toy to satisfy your needs The robust hexagonal shape construction ensures durability, making it a reliable tool for hobbyists and professionals alike. Whether you're a seasoned 3D printing enthusiast or just starting, the CIUNCARELLO 3D Printer Bed Scraper is a must-have accessory for removing prints from your bed. Embrace innovation and functionality with CIUNCARELLO. RECOMMENDATIONS: Print with a nozzle not bigger than 0.4mm Print with a layer height not taller than 0.2mm Print with PETG, ABS, PC, etc… for more durability and temperature resistance when scraping on the bed In PrusaSlicer (and most other slicers) → Print Setting → Layers and perimeters → Perimeter generator: CLASSIC (to improve text readability and gap fill) In PrusaSlicer (and most other slicers) → Print Setting → Layers and perimeters → Avoid crossing perimeters: ON (to reduce stringing between the hexagons) Print with at least 10% Infill with Gyroid Print with at least 3 Perimeters