Protoxtruder 2.0 Ebb36 mount

Print using ABS/ASA or PETG, default settings Strain relief for the CAN Cable built into the model, i designed it with 8mm cable in mind but works with other sizes The spacer is for extra support that i recommend using. The spacer will need you to change the screw under the idler arm to m3x20mm. Screwed directly into plastic 2 Versions of the mount: The default mount uses heatset inserts to mount the board to the mount. DS version stands for direct screw, like implied screws into plastic Board mounting screws are regular m3x8 screws, any type of head will do even countersunk if you feel like it.