Prusa Balance Game Box Mod with Locking Magnets

Designed box with inserted magnets and added magnets to the board. Now it holds closed and you won't be loosing game parts. Reused idea with the board stand. You will need 12 pieces of 20x6x2 mm magnets . Pick box size you want. The smallest is for 2x 20 original figures, the highest can take 3x 20 or some bigger figure remixes. For playing figures see the original model or other remixes. Print Instructions Designed for 0.2 mm layer height At least 3 perimeters for the 0.4 mm nozzle No supports needed Don't forget to pause the print at the right height to insert the magnets! Use same polarity for all magnets!!! Up to you if you print the board colored or single-color