Prusa Mini Horizontal ESP32 Camera Mount

Files Top Base Base with antenna Photos: Grey Print = No Antenna Black Print = Antenna Printing This model does not require external hardware to fit together. Printed without supports. Print setting used in photos: PLA, Prusa Mini + Input Shaper, 0.15mm Structural, 15% Infill Clearance Tolerance Clearance is good with 65 FOV Camera. Smaller clearance with 160 FOV at minimum X axis; however, the print arm only gets that close when calibrating. PLEASE CHECK TOLERANCE BEFORE PRINTING 📷 Image redacted — claim this model to add your own media Camera View 65 FOV works; however, I recommend the 160 FOV lens to get a better view of the build plate. 160 FOV 📷 Image redacted — claim this model to add your own media 160 FOV at Z Level 0 📷 Image redacted — claim this model to add your own media 65 FOV 📷 Image redacted — claim this model to add your own media 65 FOV at Z Level 0 📷 Image redacted — claim this model to add your own media I would recommend a 90-degree micro USB to the camera to avoid the cable snagging on the screen!