Prusacaster - Remix for Telecaster Two kit from Blackbeard's Den

Guitar kit parts from TL2 kit at Blackbeard's Den 3x M3 threaded inserts for bridge 3x M3 bolts for bridge ~30mm 10x M4 threaded inserts for body optional 10x M4 bolts ~25mm optional 8x small screws for pickguard (used the ones that came in the kit) Roll of double-sided copper adhesive tape (for cavity isolation) optional Glue to join body parts (I used Gorilla Glue, sparingly) I strongly advise printing out a few minimal test prints to save yourself time and money: a cut-out section of the neck of MainBody to check the neck/body fit a version of all parts with just the top few layers to check overall alignment I printed most parts as 7 perimeters, with a 0.6mm nozzle, using Prusament PLA, or eSun PLA+, with eSun SilkPla for the pickguard. I had to shave down the elephant's foot that I forgot to compensate for, as a result of the high perimeter/top/bottom layer count.