Radio Control version of the MiniSkidi Mk3, with FPV

There is a PDF file giving the parts I used and some build notes. The OpenTx transmitter files and “sounds” are also included in a ZIP file. This is quite a challenging build due to its small size but great fun to operate. Only the parts I modified are included in the STL files. For all the other parts use the original Professor Boots files. The main parts I changed are: Main Housing - modified to “locate” the track motor speed controller and RC switches, and to attach a servo to operate the Left Arm instead of the N20 motor. Left Arm - to attach to the servo. Right Arm - to incorporate the changes I made for a quick release “Claw” wiring connector (see another of my "Remixes"). Axles and Wheels - to free up space inside the MiniSkidi and to make the Wheel / Axle interface easier to print. Driver Cage - Visual improvements, different Leds and cable ducts, plus slots in the roof for the FPV camera to see through when the arms are raised. Fork Lift attachment - made smaller to look more in “scale”. New Part - “Floor” which holds down the two track drive motors (replaces the original motor clamps) and also locates / attaches the radio control receiver, FPV system, and LiPo. New Parts for the FPV camera and its “tilt” servo system.