RAK19007/RAK5005 case for Meshtastic

**You can purchase this case and others already printed: ** US customers can purchase from QuantumShadow3D: ( https://www.etsy.com/shop/QuantumShadow3D ) UK/EU customers can purchase from 3DChicken: ( https://www.3dchicken.co.uk ) These models are intended for personal use only. DO NOT copy, sell, trade or otherwise gain from my designs without my explicit permission. Anyone interested in licensing this design for non-commercial (i.e. private) sale can message me here to discuss. Please respect the Creative Commons license restrictions I have chosen (https://creativecommons.org/licenses/by-nc-nd/4.0/) and I encourage anyone who sees my designs for sale contact me. With all that said, now on to the models… Update 15-September-2023: Fixed screw depth issue for GPSswitch and powerswitch front covers Uploaded v15 of all case models with many refinements Added new ‘Waves’ pattern Added back covers to support 6mm, 9mm, and 12mm thick li-po batteries Added ‘Smooth’ and ‘Ribbed’ side versions of the 18650 battery back covers This is a case for RAKwireless RAK19007 and RAK5005 WisBlock kits, designed with the Meshtastic project ( https://meshtastic.org ) in mind. It will accommodate the RAK19007 or RAK5005 base board plus the RAK4631 (LoRa), RAK12500/1910 (GNSS/GPS), RAK13002 (IO), and RAK18001 (piezo buzzer) modules. Required hardware: Four (4) M3x20mm socket head cap screws Four (4) M3 nuts Four (4) M2.5 screws (to secure RAK base board to frame) Small battery: one (1) lithium ion battery pack: 1,200mAh from https://www.adafruit.com/product/258 Big battery: one (1) lithium ion battery pack: 2,500mAh from https://www.aliexpress.us/item/3256802801560925.html (603090 battery code) Bigger battery: one (1) MakerFocus 3000mAh lithium polymer battery pack: https://www.amazon.com/3000mAh-Rechargable-Protection-Insulated-Development/dp/B08T6GT7DV ; requires the 12mm battery back cover Biggest batteries: two (2) 18650 cells (protected cells highly recommended!) Optional hardware: RAK1921 or similar 0.96" OLED screen Four (4) M2x4mm screws (to mount the OLED screen) Four (4) M2 washers (to mount the OLED screen) One (1) Miniature Slide Switch SS-12F16 G4 (for GPS power toggle): https://amazon.com/dp/B08947137H One (1) momentary micro push button (for IO5/user button): https://amazon.com/gp/product/B07C7211PJ - Note: user button requires either a RAK13002 IO board or a “mini IO board” ( https://www.etsy.com/listing/1254963521/mini-io-expansion-board-for-rak-wireless ) that exposes the IO5 pin not physically present on the RAK19007 and RAK5005 base boards One (1) dual-18650 battery holder (if using the extended 18650 battery back cover): https://www.mpja.com/PARALLEL-Battery-Holder-for-Two-18650-Lithium-Batteries/productinfo/36012+BH/ Minimum required model files: RAK19007-5005_front-<pattern> (horizontally oriented screen) +OR+ RAK19007-5005_front-<pattern> (vertically oriented screen) +OR+ RAK19007-5005_noscreen-front-<pattern> +OR+ -GPS-front-<pattern> (includes area for slide switch to toggle GPS power) RAK19007-5005_back-<your pattern and battery thickness choice> RAK19007-5005_button-plate (only if user button) RAK19007-5005_button-reset RAK19007(or 5005)_frame (user-button or no-user-button) Notes: Dimensions: 103mm (L) x 50mm (W) x 30mm (H) - Standard 12mm battery back Dimensions: 103mm (L) x 50mm (W) x 45mm (H) - Extended 18650 battery back OPTIONAL: GPS switches are no longer required as of Meshtastic firmware v2.2.4; triple press the user button to disable/enable power to the GPS module (if installed)