RatRig V-Core EVA 3 4028 Mini Blower Fan Mod

Made this mod for the blower as i didn't like the height of the original when first assembling my VC3. Been using and testing my original test model for several months now and has been working well so decided to finally share. This model has been strengthened slightly at the bridge above the bottom bolt where it sometimes gives way, i put this into my original test model back in december as i had issues also when printing the original EVA model. Yes there's a very small lip on the inside.. i couldn't remove it no matter how many times i hit delete! (it can be removed later just by picking at it once printed, or don't it doesn't matter) Made a Nuts and Fi version so everyone is happy. UPDATE 09/04/23: (I have added another file for Heat inserts, it is names 4.5ID as a member on Discord had size issues)(may be worth printing 5-10mm of model and test fit inserts to check they fit snugly or not at all, the top/ bottom part of the insert which is narrower should be the only bit fitting into the holes before adding heat, the insert should not just fall in) ------------------------------------------------------------- (May need to also print the wire guide i've added as might bump into original as it passes when homing, i tried keeping as much entrance size for airflow etc.. i can't fully remember but have added anyway.) (Normal RatRig/ VORON print settings do the trick)