Realistic ribbon Christmas tree

This is a mashup between DrJones 's design " christmas tree " and my design " Ribbon Christmas tree ". While the original model weighed only 20g this one weighs about 80g; the spring and the star are compatible between the two models. I recommend printing all the pieces without supports (the STL files already contain the correct positioning of the pieces to avoid supports). STAR VARIANTS 📷 Image redacted — claim this model to add your own media INSTRUCTIONS 🧰 MY SETTINGS Nozzle : 0,4 mm Layer height: 0,2 mm walls: 3 top/bottom solid layer: 6 infill type: rectilinear infill density: 15%(tree), 20%(the rest) NO supports NO vase mode ASSEMBLY Stretch the spring a bit so that you can work with it better; 📷 Image redacted — claim this model to add your own media insert the lower end of the spring into the first hole at the base of the tree, as shown in the photo; 📷 Image redacted — claim this model to add your own media insert the lower end of the spring into the second hole at the base of the tree; 📷 Image redacted — claim this model to add your own media insert the tip of the tree into the hole at the top of the spring; 📷 Image redacted — claim this model to add your own media place the star on top of the spring; enjoy! 🎄