Replacement of the Ender 3 S1/Pro/Plus Sprite Extruder hotend fan with a 5015 blower fan, including NUTS for secure installation Compatible with CHCB-OT Hotend

In this remix of the Ender 3 Sprite Extruder hot end fan replacement with a 5015 blower , I made several modifications, added M2.5 nuts for the extruder backplate, and M3 nuts for the fan bracket. I made a small modification to the bracket for the CR Touch, this to be able to mount the layer ventilation system that I am designing and will soon upload to the platform. Note: Compatible with CHCB-OT Hotend I also changed the screw coupling on the fan bracket to use the hex socket cap head screws M3x5 you will need 5. For this, you will need: 2 M3x20 mm screws 2 M3 nuts 2 M3 washers 2 M2.5x12 mm screws (You can use the factory ones) 2 M2.5 nuts How to print: PETG Layer height 0.2 mm or less Infill 20% or more Supports Yes When you move the CR Touch, you should adjust the x-offset. This value works for me: x_offset: -34.0 With KLIPPER You can modify the offset in the "printer.cfg" file: [bltouch] x_offset: -34.0