Resin Stirrer

wanted an inexpensive, disposable, non-porous stirring tool for mixing resin that would fit in the chuck of my drill. one side is flat for scraping the bottom of the mixing cup while the other side has a sharp edge for getting into the corners and recesses; ensuring complete mixing. Nozzle diameter: 0.6mm Layer height: 0.4mm (it doesn't need to be pretty) Top/Bottom Layers: 2 (cuts down on filament and print time) Walls: 2 Infill: 5% Lines Material: Whatever is cheap Supports: none Bed-Adhesion: none