RG405M Better Shoulder Buttons – Extended / Improved Version (Remix)

The files that were previously uploaded here for the original motherboard had the stem set to around 2mm, the console needs them to be 3.5mm and slightly wider and taller, I made the adjustments and have uploaded here so the others can use them and not need the 6 revisions I needed to get them right. It doesn't sound like much but these ones slide in place in my console perfectly now. Figured others could use them as well. I also removed the word better off them when I printed them out so that the two buttons don't rub together as the tolerances are super tight on this item. NOTE: These are for the original Motherboard not the new revised motherboard. Uploaded is my gcode for use with the below settings, and also my pursaslicer project if you need to make any adjustments to any of the blocks, and the base STL with the blocks extended for pressing the buttons. Remixed from: https://www.thingiverse.com/thing:6591384/ , not sure why but Thingiverse create tool wont allow me to link it to the original. Print settings: 0.25mm nozzle Printer: Prusa MK2s 0.08mm layer height Material: Amz3d PETG