ROOK 2020 KIRIGAMI BED MOD

Description: This mod if for a rook 2020 printer designed by rolohaun, had a kirigami bed laying around and wanted to intall it in my new rook 2020 build but couldn't find any mods so I desinged one from scratch inspired by the rook design, I have new top and bottom rod holders for 12mm rod, If using 8mm rod version you must use the 8mm rod holders. You must drill the 4 M2 holes on each side of the metal kirigami bed with a 3mm drill bit (must be 3mm drill bit to avoid alignment problems) in oder to accept the 3x10 screws needed for rigidity of the bed mount. You might need the 2mm spacers to bring the bed closer to the nozzle (optional) What you will need on material: 2 M5x20 Screws 2 M5 Nuts 12 M3x10 Screws 2 M3x16 Screws 14 M3 Nuts Print instructions: I've used ABS for all parts print settings are: 0.2mm Layer height 40% Infill 4 perimeters Supports not required