Rose with Stem 2

My Rose is a remix of https://www.printables.com/model/94284-decorative-rose by @Andi which is a remix of https://www.printables.com/model/31902-rose-cabinet-pull by @Bugman140. My Stem is a remix of https://www.printables.com/model/133069-spikey-rose-stemshaft by @Grafit. If you would like to make the stem longer you can download my stem extensions here. https://www.printables.com/model/709575-better-rose-stem-extensions I used my 95mm Rose Stem Extension in the picture. You can find the vase in my Flowers & Vases collection. https://www.printables.com/@Eds3dOdyssey/collections/1227023 Printer Settings PrusaSlicer 2.9 Rose Layer Height - .15 Perimeters – 2 Seam - Random Bottom fill pattern – I like to use Archimedean Chords Support Material Turn on Generate Support Material and Auto Generated Supports Overhang Threshold – 15 or 20 Style - Organic Top Contact Z Distance – Prusa recommends 50 to 75% of the Layer Height Fuzzy Skin Outside Walls Thickness - .2 Point Distance - .4 Paint-on Fuzzy Skin Tool Type – Smart Fill 85% The reason I use both Fuzzy Skin and Paint-on is because Outside Walls misses parts of the inside of the Rose. Make sure there is no Fuzzy Skin in the hole on the bottom. Stem Layer Height - .2 Perimeters – 2 Minimum Shell Thickness Top and Bottom – 1mm Seam - Random Top and Bottom fill pattern – I like to use Concentric with the stem with leaves. Brim – You might need to use a brim for the dowel. Fuzzy Skin Outside Walls Thickness - .2 Point Distance - .4 Make sure there is no Fuzzy Skin in the holes on the top and bottom. Do not use Fuzzy Skin on the Dowel. If the dowel rod is a little too small or a little too big try increasing or decreasing the XY by 1 or 2%. I use a heat gun to bend the leaves. If you have any questions, just ask. Please post pictures!!! Filament used in the pictures Roses - Printed Solid PLA Jessie Elixir Royal Ruby Stem - Printed Solid PLA Jessie Green Ice Vase - Prusa PLA Pearl White