Rugged Humbrol storage box

This is a storage solution I made for my Enamel paint cans. It's based on Whitys Parametric Rugged Box. Works with Humbrol and Revell paints, possibly other brands as well. I made versions for other types of paint as well, see links: Rugged box for Tamiya 10ml bottles Rugged box for Tamiya 23ml bottles My addition is the insert for the paint bottles, and an optimized fixed size of the box for your convenience. Additional material needed: M3x25mm screws (6x for one box) Instruction: Print the box (base, lid and insert) with PLA or PETG Print latch x2. PLA will work but I recommend PETG for this part The seal is optional. If you want it, print with TPU. Glue the insert to the bottom of the box. I think epoxy is the better choice. Put the box together with the M3 screws. Note: Two minor adjustments to the lid are needed after printing. Just cut away the artefacts on the hinges after printing. You will also want to rinse the holes on the lid with a drill. These errors derives from the original model, the parametric settings breaks down on a box this slim. I might fix that later on.