Saguaro Cactus with Rocky Base

31-May-2023 updates: Added a 4-arm cactus option. It has a slightly narrower top to the stem than the 2-arm version to allow rings to sit slightly lower on the stem. Each of the 4-arms are slightly different in diameter to each other. Added a tray version of the rocky base. Because of the taper at the base of the cacti and in the hole in each base, 100% scale works well for the assemblies with no extra clearance needed. --- Cactus designed at 150mm height. My cactus and rock base general print details: 0.4mm nozzle and line width with 2 line wall count 0.2mm resolution 10% cubic infill No supports My cactus specific print details: 100% scale Filament: Hatchbox True Green PLA TTYT3D Fast Color Gradient Change Shiny Silk Multicolored Amazon Basics Silk Blue PLA My rock base specific print details: 102% scale for extra clearance during assembly with the 100% scale cactus Note: the cactus has taper, so scaling for clearance may not be needed Filament: Overture Matte Gray PLA