Santa Sleigh in a bauble (Christmas tree ornament)

📷 Image redacted — claim this model to add your own media https://www.buymeacoffee.com/maxt ---------------------- 2mm thick The best quality is achieved if printed face down Print: 0.2mm Nozzle: 0.4mm Support: Not needed Brim: Not needed Infill: Not needed, but I'd suggest going with 100% to ensure sturdiness A tip: If you want to get this print easily off your heat bed, place the heat bed with the printed model in the freezer for 10 to 30 mins. Take it out, and it should pop off quite easily without any breaks/cracks, as shown on the photo below :) 📷 Image redacted — claim this model to add your own media Happy Printing! -------------- 📷 Image redacted — claim this model to add your own media https://www.buymeacoffee.com/maxt