Screw on lid for Ikea 365 Drybox dessicant box

Requires: 2x voron style M3 5mm dia 4mm long heatset inserts 2x m3 x 8mm screws, head style isn't too important, BHCS or SHCS work well. Don't use countersunk screws. There is a drilling guide so you don't have to reprint the boxes, just drill with a 3.2mm bit. I printed these with cheap changeover PETG and you can see where I had a runout and swapped to an entitrely different colour. They should work in PLA as well, not tried in ABS/ASA.