SCS Small Card Slinger

Hi, this is my take on the Card Slinger 1.0 and the Card Slinger 1.0 Phone Stand Add-On combined. Its smaller cause I dreaded the long printing time. While moddeling I thought about that people, me included, might prefer a version without a bottom for easier unloading. You need to do that more often cause it smaller. It should hold around 100 Cards, i tested it with very old and “fluffy” Yu-Gi-Oh cards and it held around 75 before i needed to empty it. Be aware the version with a bottom is 0.5mm shallower so you lose a few cards of volume. The locking feature is experimental so I uploaded both versions, with and without. For best/fastest scanning results use white or high contrast filament to make it easier for the scanning app. SCS = SmallCardSlinger PH = Phone Holder B = bottom L = lock Example: SCS1_L+PH1_L Small Card Slinger 1 without Bottom, with Lock + Phone Holder 1 with Lock Size of SCS1+PH1 is 139.9mm x 95.5mm because I wanted it to be able to print on a Flashforge Finder 2. If you have any complaints or ideas to make it better, please leave a comment. Also please go and visit the originals and give them a like, they deserve it and are what inspired this version.