SDS MKIV / MKIV I SparkMAX Mounts

A collection of mounting solutions for attaching REV Spark MAX Motor Controller controllers to SDS MKIV Swerve Module and SDS MKIV I Swerve Module swerve modules. These mounts offer multiple installation options depending on module orientation and available space on the robot. Note: Only the top-mounted MKIV I cover provides physical protection for the Spark MAX. The other mounts are primarily intended for mounting and cable management and leave the controller partially exposed. MKIV I Mounts Top-Mounted Cover This design consists of a lid and base that mount above the motor. Features: Enclosed cover that offers protection for the Spark MAX Three integrated wiring channels for cleaner cable routing Side-Mounted Cover This mount attaches to the side of the module by replacing two motor standoffs, with the Spark MAX secured to the mount using two zip ties. Notes: No additional hardware required Motor wire positioning is important for proper fitment MKIV Mounts Top-Mounted Cover A compact cover designed to mount above a single motor. Notes: Each cover supports one Spark MAX Leaves the controller largely exposed Designed with REV NEO Brushless Motor motors in mind Spark MAX secured using zip ties Side-Mounted Cover This mount replaces two motor standoffs to attach the Spark MAX to the side of the module. Two versions are included depending on module orientation: Front-left / rear-right module Front-right / rear-left module