Seaflow 1/2" water pump filter strainer mount

tried searching for a mount for this filter but couldn’t find anything suitable, so I decided to design my own to secure the filter properly while keeping the strainer easy to access for cleaning. The mount is designed to use M6 bolts with a minimum length of 60 mm. The bolt passes through the mount and threads into the plate where the filter is installed. Printing Details: Material: ABS Infill: 25% Walls: 4 Top/Bottom Layers: 4 I chose ABS because the mount is installed in my car, and here in the Middle East the interior temperature gets extremely hot during summer. PETG should also work well in cooler climates.