Seed dispenser for gardeners with disabilities.

Printing: When you print the files, all of them are made of PLA with the exception of the file "Insert.stl", which needs to be printed out of TPU. Assembly You will also need a small spring that is 14mm in diameter for the plunger mechanism, and you will need to glue to plunger cap onto the Unchamfered end of the plunger AFTER it is all fully assembled, if you do it before you will be unable to assemble the mechanism. The spring hooks itself over the 2 screw-threaded circles on the tube, make sure to do this properly as otherwise it may unhook itself/come of later on it will not be able to move up and down properly. You will also need to glue the small TPU insert into the nozzle as otherwise it will be lifted upwards by the plunger. Use To fill the product with seeds unscrew the nozzle from the bottom and fill the tube with as many seeds as you wish, then screw the nozzle back on, to dispense the seeds give the product a small shake then push down on the plunger.