Sensory Cube Joystick Fidget

Update: I have added a split version with and without supports, the two halves will have to be glued together with the core ball in the middle. ##Sensory Cube Joystick Fidget Is a completely printed in place and support free fidget toy that is designed to have multiple sensory features combined together in a simple cube that is easily printed. It prints quickly and with no supports on a well calibrated printer, there are some parts that have large overhangs so keep that in mind before printing. This can also double as a calibration device for your printer that can be played with afterwards! Printing instructions: Recommended settings have been included as a 3mf file, however if you wish to use the stl file I strongly recommend .2 layer height maximum, 3 walls , and at least 10% infill for strength of the smaller sections of the print. I Also Strongly Recommend You Use A Brim On the bottom center!! The central support for the ball can shake loose during the print otherwise. I hope you enjoy, let me know your thoughts in the comments and post your makes! Check out my other designs!! over at my profile: Merpos If you'd like to support my work you can leave me a tip over at https://ko-fi.com/merpos