Shelby Cobra - Print Ready

There are basically only 3 print processes: the body, the tires, and the finer details. I printed everything except for the tires and the body in gray , some were painted red if necessary. All gray parts were printed with 0.2 nozzle and 0.12mm layer height for more detail. I had to shorten the front cooling part to make it fit into the hole. 📷 Image redacted — claim this model to add your own media I printed the body upright with 0.4mm nozzle a 0.2 layer height. Otherwise, the layers will be too visible. My recommendation: Do not print flat! I sprayed the body with clear varnish. The mesh of the body has some floating parts, but Cura automatically fixes this for me. 📷 Image redacted — claim this model to add your own media The tires were printed as follows: Rotate the front tires by 10 degrees in the printing program of your choice so they can be printed flat with support. with 0.4mm nozzle a 0.2 layer height.