Siboor Voron AWD Trident Bambu Nozzle Brush

Simple nozzle brush that mounts to the bed frame. Needed a way to wipe before cartographer does it z offset using touch. Brush used : https://s.click.aliexpress.com/e/_mMPr8W8 Print in ABS or ASA Need 3m x 16mm long bolt and your choice of slip in nut Edit Variable_start X and Y and Z if needed ( This is for 300mm Bed ) I stuck the brush as close as the bed as i could so your variable_start_Y could be different then mine. i also use .5 for variable_start_z. But i would start with 8 to make sure its brushing in the right area first then bring down your variable_start_z to get the nozzle as deep as you like in to the brush. ############################################################## [gcode_macro CLEAN_NOZZLE] variable_start_x: 228 variable_start_y: 307 variable_start_z: 1 variable_wipe_dist: -35 variable_wipe_qty: 10 variable_wipe_spd: 200 variable_raise_distance: 20 gcode: {% if "xyz" not in printer.toolhead.homed_axes %} G28 {% endif %} G90 ; absolute positioning ## Move nozzle to start position G1 Z6 G1 X{start_x} Y{start_y} F6000 G1 Z{start_z} F1500 ## Wipe nozzle {% for wipes in range(1, (wipe_qty + 1)) %} G1 X{start_x + wipe_dist} F{wipe_spd * 60} G1 X{start_x} F{wipe_spd * 60} {% endfor %} ## Raise nozzle G1 X282 Z{raise_distance} ##########################################################