Simple Viking Era Sword (and Scabbard)

Here's a simple Viking-era sword for you, with a simple scabbard! (turns out that straight scabbards are easier to make than curved scabbards, who'da thunk?) There are three guard options and two pommel options for your pillaging pleasure. As with my other swords, I recommend using two of the aluminum bars for stability: https://www.amazon.com/uxcell-Square-Aluminum-Industrial-Building/dp/B0CZ4F77TL/ref=sr_1_1?crid=2YC44QP19XFU&dib=eyJ2IjoiMSJ9.yrT3wN8wnqFGqZDjcmq6fatJDvNClL8EfaGUbe-YJslRi90Q-_wNm0WlYqwwRtTJ3A4Ud63Lj8nKcDEWaMQbMWRJlVCeF29mMAbaXCQ72uceCkPtDX1k6wqSe8HQ13dIDgY7HpgvYrjKIHy-whdP8HQsv0bXXkervx3B1lEKPRjXzoDwsXi7VKjUiaD0f5aHzEpDDd7o4-ZWzEowW-NyRAItDDCq51uemzEUhMuYwaM.t6QtcEjOX3inIJQwEiCOAkkzg80EbPUdKsPLyQU_FNg&dib_tag=se&keywords=uxcell%2BSquare%2BAluminum%2BFlat%2BBar%2C%2B2Pcs%2B1%2F8%22%2BThick%2B0.4%22%2BWidth%2B12%22%2BLength%2BSquare%2BAluminum%2BBar%2B6061%2BAluminum%2BFlat%2BPlate%2C%2B3%2Bx%2B10%2Bx%2B305mm%2BT6511%2BSolid%2BNew%2BMill%2BStock%2Bfor%2BIndustrial%2BBuilding&nsdOptOutParam=true&qid=1768784195&sprefix=uxcell%2Bsquare%2Baluminum%2Bflat%2Bbar%2C%2B2pcs%2B1%2F8%2Bthick%2B0.4%2Bwidth%2B12%2Blength%2Bsquare%2Baluminum%2Bbar%2B6061%2Baluminum%2Bflat%2Bplate%2C%2B3%2Bx%2B10%2Bx%2B305mm%2Bt6511%2Bsolid%2Bnew%2Bmill%2Bstock%2Bfor%2Bindustrial%2Bbuilding%2Caps%2C264&sr=8-1&th=1 You can also use the included printable bar if you just want to display the sword. The printed bar will probably need to be sanded to fit the slot, as the plastic tends to be slightly over sized, for me at least. To tighten the fit in the scabbard without damaging the blade finish, you can hot glue some felt pieces on the inside of the opening. Now go out there and take back what was never rightfully yours in the first place!