SINGER Sewing Machine Thread Spool Holder - SINGER Heavy Duty - SINGER SIMPLE

A simple Thread Spool Holder you can 3D print! It works so well it'll make you wonder what you ever did without it! No more tiny baby spools of thread or spool stands that get tangled up! It sits on top of the sewing machine where you can observe it unspooling thread just like we all want! Features; One piece design Printed in under 2 hours using 26 Grams of filament on Ender printer No Supports Printing at 20% Infill No Modification Required - Fits ONTO machine Primary Spool can still be used - Possible second spool for twin needle application Dimensionally accurate model i.e. 6mm hole for 6mm spool rod. This part has been tested on a Singer Simple and a Singer Heavy Duty. I suspect it will work with other Singer models. You can print the TEST piece to verify it will fit correctly -- adjust scale per your print discrepancies as needed. NOTE: The hole the 6mm Spool rod has a slight angle to create spring pressure where the holder sits on top of the machine. This pressure keeps the spool holder from moving. 2nd NOTE: CURA slicer program has a setting "Initial Layer Horizontal Expansion " that I recommend you use at a negative value twice the diameter of your nozzle diameter. i.e. .40 mm nozzle will be -0.80 (negative value). This will remove any elephant foot on the base of the per that may occur as that i did not design a chamfer on this print to prevent that. Initial Layer Horizontal Expansion will have to be enable in Setting Visibility to see it. I have another design here: https://www.thingiverse.com/thing:7305195