Smokers Box – Travel Edition | Pocket Rolling Station

A compact travel version of the original Smokers Box rolling station. Designed to keep your rolling area clean, portable, and waste-free. Loose tobacco falls through the honeycomb work surface into the pull-out tray below, keeping your workspace tidy and allowing you to easily collect and reuse anything that would normally be lost. The Travel Edition keeps the same concept as the original but in a smaller pocket-friendly format. Features • Compact travel-sized rolling station • Honeycomb work surface lets loose tobacco fall into the tray • Shallow pull-out drawer for collecting and recovering tobacco • Snap-on lid for transport • Lid front lip locks the drawer closed when the box is shut • Removable V-channel insert to help shape rolls • Mini scoop tool included for gathering material • Bonus reusable printable filter tip included Middle slot sized for standard rolling machines approx: 120mm length (e.g. RAW, OCB, generic king size rollers) Standard king size papers Dimensions Closed size: 160 mm (W) × 75 mm (D) × 43 mm (H) Designed to be small enough for a pocket or bag while still providing a practical rolling area. Included Parts Main parts: • Outer shell • Honeycomb platform • Pull-out tray • Snap-fit lid Accessories: • V-channel rolling guide • Mini scoop tool • Reusable filter tip (optional) A bigger model with mobile phone support is also available here: https://www.thingiverse.com/thing:7301799 Print Settings All parts printed successfully with the following settings: Layer height: 0.20 mm Walls: 5 perimeters Infill: 5–10% Supports: minimal – small support under shell front lip only Material used for testing: PETG PLA should also work fine. Print Time (Approximate) Times will vary by printer and speed settings. Example print times: • Lid – ~2h 5m • Shell – ~2h 4m • Honeycomb grid – ~1h 26m • Drawer tray – ~1h 6m • V-channel – ~36m • Scoop – ~6m • Filter tip – ~5m Total filament used roughly 150 g. Any printer with 200 × 200 mm build area or larger Assembly Assembly is simple: Apply some glue to inner ridges of shell Insert the honeycomb platform into the shell Slide the drawer tray into place Place the lid on top for transport Store the V-channel insert inside when not in use When the lid is closed, the front lip engages the drawer groove and prevents the tray from sliding open. This design focuses on simplicity and portability. The goal is to keep your rolling area clean and prevent material waste while remaining compact enough for travel. Filter tips: Advised... PETG. 4mm brim. Single use only - do not re-use. Ensure filament is clean and and trimmed properly after printing