Smokey and the Bandit - Kenworth W900A for the RC SemiTruck

This is a redesign of the awesome truck from ProfessorBoots to look like a Kenworth W900A. I grew up with the movie Smokey and the Bandit and therefore I wanted to have a Kenworth in addition to the Peterbilt. To have the same color scheme like the truck in the movie, you can use the paint option in the slicer. There is an indent of 0,01mm. That is enough to be painted but too little to affect a single color print. As the Kenworth in the movie is quite short, I use the short mid frame for this. You can download the PCB files for the short frame from his Workshop. All new/modified parts are uploaded here. The rest is standard and can be downloaded in ProfessorBoots page. I've changed the way the hood is mounted to the chassis and cab. I use magnets instead of the straps, but you can use straps as well. The roof of the sleeper is also hold in place with magnets. For the sleeper you'll need 8 magnets and for the hood 10 magnets with the dimension 6mm x 3mm. https://s.click.aliexpress.com/e/_c3mqI55d The longer fuel tanks will only work with the short mid frame. If you use the regular mid frame, you have to use the regular fuel tanks. Cab markers and horns can be glued or screwed to the cab.