Springy Doorstop (flexible and in multiple sizes!)

Welcome to GlennovitS3D. Join the Club on Printables.com to support creation of new models , get access to exclusive models , and get commercial rights, to sell prints. Join today - GlennovitS3D - or check out my model collection or my popular models Updates 9. Nov 2023 - Added multiple new versions. Both with higher and lower angle (to fit more doors) AND all versions with a normal and a pointy version (where the tip is not rounded, to fit under doors with less space below) Description Want a minimalistic doorstop, that is easy to print and uses the material flexibility to lock the door in place - then look no further! 📷 Image redacted — claim this model to add your own media Overview This doorstop comes in multiple sizes, and can be scaled to your liking. So give it a go, try it out, and if you want, print another one that is smaller/bigger, stronger or more flexible - to be the perfect fit for your door! Sizes The model comes in 24 versions now. It comes in 4 sizes: Small Medium Large X-Large There are also 3 angles to fit different space below different doors: Low angle Default High angle And there are 2 styles of the tip Default (rounded at the tip) Pointy (to fit under very tight spaces) All of the versions are 40 mm in width as standard, but can be scaled up and down in the slicer (just scale the Z direction) More practical prints? I got you covered! Check out this collection of practical models - everything from tools to storage solutions. 📷 Image redacted — claim this model to add your own media Print instructions Speed on first layer : 50% (To ensure good bed adhesion) Infill : 0% (to make the model 'springy’) Top/bottom layers : 0 Perimeters : 2-3 (try out different combinations - the ‘springyness’ is very depending on this parameter AND the material of your choice!) You can also to a stylised version with exposed infill if you like that look. Makes the model less flexible, but more stylised - your choice. Infill : 5-15% Infill pattern : Honeycomb (or gyroid or whatever you like the best!) Happy printing!