Steamrack - Steamdeck dock wall mount

Description I prefer to mount my consoles up high to keep them out of small hands and make them easier to store safely. This docking pad is designed to hold the official Steakdeck docking station as well as the Steamdeck itself. It has 6 mounting holes for securing it to different surfaces with 4.2mm screws (a standard #8 drywall screw will work). There are holes on the side as well as the bottom to allow cable passthrough for all the potential connectors the dock can accept. I designed the rear tray portion to allow bulky cables behind the deck, including the larger variety of DisplayPort cables, so you shouldn't have any issues wiring your dock up. The tolerances look tight, but the cables feel fine for mine, which are rather bulky. Printing Orientation: flat on the bottom Supports: none (though if your printer has trouble with progressive bridges, you might paint some there). Infill: 13-15% Material: PLA / Any Brim: none (if printing flat, the bottom surface is so large it should print without anything)